Quantcast
Channel: Intel Communities : Popular Discussions - Servers
Viewing all 3319 articles
Browse latest View live
↧

Intel Server Board S2600STB extremely slow (Booting + BIOS + Performance)

October 9, 2018, 1:37 pm
$
0
0

We have custom build server with Intel Server Board S2600STB + two CPUs SILVER 4110 + 6 modules SERVER MEMORY 16GB PC19200/REG KVR24R17S4/16 KINGSTON.

The problem we have is very strange. Server booting to BIOS screen after F2 takes about 1 minute. Every BIOS menu open takes 5 seconds, load default settings and save settings takes 20 seconds. Also, we have a Adaptec RAID kontroller installed. Adaptec RAID configuration also runs very slow and freezing, you can see how every screen have been drawing Debian installation till progress 20% on SSD M.2 takes 2 hours, also Windows installation till 30% takes about 4 hours. So, all system is running extremely slow, you can see how every BIOS screen have been drawing on monitor, like you have 0.00005 CPU cores. Server is brand new with all new components.

BIOS are on latest 14 version.

↧
Search

S2600CP Windows 10 watchdog driver

March 13, 2018, 1:55 am
$
0
0

Good Day.

I am tried enable "OS boot watchdog timer" at BIOS, but my OS (Window 10 - 1709) always rebooted.

I didnt find Intel Watchdog driver and i dont understand how i should install it.

I am really need your help.

 

How i should check this driver? Does this function support Windows 10?

watchdog.JPG

RMM Status :Intel(R) RMM not installed
Device (BMC) Available :Yes
BMC FW Build Time :Mar 23 2017 20:14:24
BIOS ID :SE5C600.86B.02.06.0006.032420170950
BMC FW Rev :01.28.10603
Boot FW Rev :01.17
SDR Package Version :   �� dd ddd
Mgmt Engine (ME) FW Rev :02.01.07.328
↧
↧

Intel® HNS2600BPS24 system disk

October 4, 2018, 5:35 am
$
0
0

Bios does not see the system disk.I set the image through the clonezilla and the disk appears.After installing the system, the disk does not appear in the section BOOT. I try to start with Legacy and UEFI. Plz who can help in this matter? Sorry for my bad english.

↧

memory thrm related warnings/errors on vmware.

August 28, 2018, 3:34 am
$
0
0

Добрый день !

 

У меня подобная проблема которая тут обсуждалась. Ответа на вопрос я не нашёл и поэтому повторяю :

 

Remote Management Module key :     Installed

Device (BMC) Available :     Yes

BMC FW Build Time :     2018-06-07 11:48:53

BIOS ID :     SE5C610.86B.01.01.0027.071020182329

BMC FW Rev :     1.53.11210

Boot FW Rev :     1.07

SDR Package Version :     SDR Package 1.17

Mgmt Engine (ME) FW Rev :     03.01.03.050

Baseboard Serial Number :     BQTP61800321

 

 

 

 

Сенсоры в BMC WEB console :

 

VRD Hot    All deasserted    OK    0x0000

DIMM Thrm Mrgn 1    Normal     OK    -48 degrees C

DIMM Thrm Mrgn 2    Normal     Unknown    Not Available

DIMM Thrm Mrgn 3    Normal     OK    -51 degrees C

DIMM Thrm Mrgn 4    Normal     Unknown    Not Available

Agg Therm Mgn 1    Normal     OK    -7 degrees C

 

Постоянно, приблизительно каждые 5 минут в сфере vmware выходит сообщение о температуре на DIMM. Помогите от этого избавиться. 

 

for english :

 

Good afternoon !

At me a similar problem which here was discussed.I did not find the answer to the question and therefore I repeat:

Remote Management Module key: Installed
Device (BMC) Available: Yes
BMC FW Build Time: 2018-06-07 11:48:53
BIOS ID: SE5C610.86B.01.01.0027.071020182329
BMC FW Rev: 1.53.11210
Boot FW Rev: 1.07
SDR Package Version: SDR Package 1.17
Mgmt Engine (ME) FW Rev: 03.01.03.050
Baseboard Serial Number: BQTP61800321

Sensors:

VRD Hot All deasserted OK 0x0000
DIMM Thrm Mrgn 1 Normal OK -48 degrees C
DIMM Thrm Mrgn 2 Normal Unknown Not Available
DIMM Thrm Mrgn 3 Normal OK -51 degrees C
DIMM Thrm Mrgn 4 Normal Unknown Not Available
Agg Therm Mgn 1 Normal OK -7 degrees C

Constantly, approximately every 5 minutes in the vmware sphere there is a message about the temperature on the DIMM.

 

help please get rid of it.

 

↧

CPU Upgrade E5-2640 to E5-2650 V2

October 11, 2018, 4:20 am
$
0
0

Hi guys,

 

i need help. We have the intel mainboard S2600GZ and our supplier says to us, that we need the BIOS Version 01.01.1002 for the CPU Upgrade. On the Intel Download Site i can't find this Version of BIOS. By other Version the server show no screen and no BIOS. The server starts only with E5-2640 CPU by each BIOS Version of the Intel Site. Have anyone this special Version?

 

Thanks!

↧
↧

Intel ASC doesn't seem to upgrade

October 9, 2018, 10:46 am
$
0
0

I installed ASC on a new server and realized I had installed an old version. I installed the new version over the old one and opened up the webpage. Everything looks the same and when I go to help/about within the webapp I see the old version info. I tried completely uninstalling and reinstalling. I tried rebooting. Is there something getting stuck?

↧

ssd raid on server board s2600stq

October 11, 2018, 11:29 pm
$
0
0

Is it possible to create a raid from two ssd disks in the following configuration:

- server board S2600STQ

- Intel Xeon 3106 Bronze

- RAID ASUS Hyper M.2 X16 Card

- 2 * Intel SSD M.2 256Gb P3100 серия SSDPEKKA256G701

- ACTIVATION KEY RAID SSD VROCISSDMOD 956822 INTEL

or it is necessary to connect ssd immediately via PCIe OCuLink connectors?

 

This server board is missing here Intel Tested Hardware and Operating System List

↧

After upgrade BIOS version for R1208WFTYS and R2224WFTZS, System Fan Runs Too Loud and Too Fast

October 11, 2018, 7:05 pm
$
0
0

Hello all,

 

Just set up new system for R1208WFTYS and R2224WFTZS after upgrade BIOS version (S2600WF_EFI_BIOSR0014_ME04.00.04.340.0_BMC1.60.56383bef_FRUSDR1.60) and restart system,  after that System fan runs too fast and very loud.

Both server system have same motherboard (S2600WFT).

Does any one get the same issue? Please help.

Sincerely,

 

Brian

↧
Search

If Intel® Xeon® Processor Scalable Family support PCIe AtomicOps host-to-device transactions?

October 7, 2018, 9:43 pm
$
0
0

PCIe spec defined 3 types of AtomicOps transactions:

"AtomicOps are architected for device-to-host, device-to-device, and host-to-device transactions."

 

If Intel® Xeon® Processor Scalable Family support Pcie AtomicOps host-to-device transactions? The background for this question is it looks in previous Xeon generation, only PCIe AtomicOps device-to-host transactions are supported: "The Intel Xeon processor E7 V2 family supports PCIe atomic operations (as a completer)". Not sure if Scalable family extend the support to host-to-device using X86 ISA based instructions?

↧
↧

Intel RAID (RMS3CC080), how to "Online RAID Expansion", cant find it in BIOS or RWC3

March 14, 2018, 1:17 am
$
0
0

Hi

 

We have a S1200SPOR with RMS3CC080, the below document on page 6 (real PDF page 16) says this controller (and all others that are 12Gb) will:

 

"Online capacity expansion to add space to an existing drive or a new drive"

"Online RAID level migration"

https://www.intel.com/content/dam/support/us/en/documents/server-products/raid-products/12G_RAID_Controllers_UG.pdf

 

Ive completed both of the above before with PROMISE controllers and LSI / AVAGO, however i can find anyway in the BIOS or with RWC3 (RAID Web Console 3) to do this, when i select the Virtual Drive there are no options to expand or change the RAID level.

 

So how is this done?

↧

s2600cp power fault beep code

September 1, 2018, 6:59 pm
$
0
0

Hi, im using an intel s2600cp, with two xeon e5 2620 v1 processors. they are tested working in another system. when i try to power up the system, i get the following error:

1-5-4-2Power faultDC power unexpectedly lost (power good dropout) - Power unit sensors report power unit failure offset.

i have tried using 3 different power supplies, ecc and non ecc ram.

any help would be appreciated

↧

Maybe too short auto learn period for AXXRMFBU7

October 2, 2018, 12:08 am
$
0
0

Hello!

 

I've got Intel RSP3TD160F RAID Controller with AXXRMFBU7 MFBU. Raid Web Console 3 (and storcli) shows that auto learn is "transparent" with period = 1 DAY.

We have previous generation Intel RAID controller RS25AB080 with SuperCap2 module - it has auto learn period = 28 days which is on par with accumulator based BBUs.

 

Is 1-DAY auto learn period of AXXRMFBU7 normal? Is it so frequent by design or due to a firmware bug?

↧

S3420GP and RAM

May 9, 2011, 1:17 am
$
0
0

Hello,

I have a server mothebord S3420GP with 6 memory slots.

Now, I have 2 slots filled with these: 2x KINGSTON 4GB 1333MHz DDR3 ECC CL9 DIMM with Thermal Sensor.

 

Is possible to use another 4 these RAMs? So I would have 24 GB RAM with 6 x 4 GB. Is this combination possible?

 

Or is possible to use 4 x KINGSTON 8GB DDR3 1333MHz CL9 ECC Dual Rank BOX.

So total memory size will be 32 GB RAM.

 

Thanks for any answers.

 

↧
↧

Intel ASC doesn't seem to upgrade

October 9, 2018, 10:46 am
$
0
0

I installed ASC on a new server and realized I had installed an old version. I installed the new version over the old one and opened up the webpage. Everything looks the same and when I go to help/about within the webapp I see the old version info. I tried completely uninstalling and reinstalling. I tried rebooting. Is there something getting stuck?

↧

S2600CP - Power Source Fan runs too fast and loud after BIOS Update to R02.06.E0006-rev2.

September 28, 2018, 3:58 pm
$
0
0

Before I had the same problem with motherboard which reported Platform ID as S2600SDP

Intel has replaced motherboard to me by standard warranty as wrong motherboard

New board has correct identification. And Power Supply FAN was working quietly.

Support person recommended me to upgrade BIOS on new received board and the story has repeated.
Power Supply fan rotates at max speed.

It is not PS Fan fault. It is some other fault.

 

As I know already, the loud PS Fan is made for signalling of critical system faults.Customer support by phone replies too slow.

So I decided to ask here.

 

Please, help me identify the fault source. ( taking into account that fault raised right after BIOS UPGRADE )

 

I attach sysinfo logfiles here

 

Thank you.

↧
Search

Intel RAID Web Console 3 - how do we add servers to the GATEWAY server

March 6, 2018, 10:29 pm
$
0
0

Hi, downloaded RAID Web Console 3 from here Download Intel® RAID Web Console 3 for Windows*

 

- Install the GATEWAY server on a remote machine, can log in ok.

- Installed the RAID driver version (SAS v6.713.05.00 (Trimode wont load, even though its listed there doesnt appear to be drivers in the package for this card)) for the RMS3CC090 on a S1200SPOR server running Windows 10 Pro

- Installed the DIRECT AGENT service for RAID Web Console 3 on the above server.

 

Logging in to the GATEWAY server, then pressing "Re-discover servers", this remote Windows 10 S1200SPOR with the RMS3CC080 never shows up.

We have disabled the firewall on the Windows 10 system

We have disabled the firewall on the gateway server

 

Is there no way of adding servers to the gateway server?

 

All documentation for Intel RAID Web Console 3 says the RMS3CC080 is fully supported...

 

Many Thanks

↧

ssd raid on server board s2600stq

October 11, 2018, 11:29 pm
$
0
0

Is it possible to create a raid from two ssd disks in the following configuration:

- server board S2600STQ

- Intel Xeon 3106 Bronze

- RAID ASUS Hyper M.2 X16 Card

- 2 * Intel SSD M.2 256Gb P3100 серия SSDPEKKA256G701

- ACTIVATION KEY RAID SSD VROCISSDMOD 956822 INTEL

or it is necessary to connect ssd immediately via PCIe OCuLink connectors?

 

This server board is missing here Intel Tested Hardware and Operating System List

↧
↧

CPU E3-1270 V2Is the CPU E3-1270 V2 affected by the 'CVE-2018-3655' vulnerability?

October 16, 2018, 11:17 pm
$
0
0

CPU E3-1270 V2Is the CPU E3-1270 V2 affected by the 'CVE-2018-3655' vulnerability?

↧

After upgrade BIOS version for R1208WFTYS and R2224WFTZS, System Fan Runs Too Loud and Too Fast

October 11, 2018, 7:05 pm
$
0
0

Hello all,

 

Just set up new system for R1208WFTYS and R2224WFTZS after upgrade BIOS version (S2600WF_EFI_BIOSR0014_ME04.00.04.340.0_BMC1.60.56383bef_FRUSDR1.60) and restart system,  after that System fan runs too fast and very loud.

Both server system have same motherboard (S2600WFT).

Does any one get the same issue? Please help.

Sincerely,

 

Brian

↧

S2600CP - Power Source Fan runs too fast and loud after BIOS Update to R02.06.E0006-rev2.

September 28, 2018, 3:58 pm
$
0
0

Before I had the same problem with motherboard which reported Platform ID as S2600SDP

Intel has replaced motherboard to me by standard warranty as wrong motherboard

New board has correct identification. And Power Supply FAN was working quietly.

Support person recommended me to upgrade BIOS on new received board and the story has repeated.
Power Supply fan rotates at max speed.

It is not PS Fan fault. It is some other fault.

 

As I know already, the loud PS Fan is made for signalling of critical system faults.Customer support by phone replies too slow.

So I decided to ask here.

 

Please, help me identify the fault source. ( taking into account that fault raised right after BIOS UPGRADE )

 

I attach sysinfo logfiles here

 

Thank you.

↧
Viewing all 3319 articles
Browse latest View live
Search
<script src="https://jsc.adskeeper.com/r/s/rssing.com.1596347.js" async> </script>