Quantcast
Channel: Intel Communities : Popular Discussions - Servers
Viewing all 3319 articles
Browse latest View live
↧

RAID Driver for Intel S3000AH motherboard Windows Server 2008 R2

October 29, 2010, 4:52 am
$
0
0

Support for this motherboard has ended.  This board had been purchased 02/01/2007.  However, with the release of Windows Server 2008 R2, it's like breathing new life into a server that still has adequate speed.  Currently I have an Intel Core 2 Duo Processor in the system with still room to grow.

 

Sadly, there is no W2K8 R2 driver for the Intel Embedded RAID, Intel® ICH7R I/O Controller.

 

Hey INTEL!!!  Can you make a driver please???  I purchased your board with the consideration that I could later upgrade it keeping up with technology.  Thanks in advance.

 

As for other readers, if you know of a 3rd party driver source, please point me in the right direction.

 

Superman808

↧
Search

SS4000-E 100% Full Can't access data, enable FTP, or SSH

May 4, 2014, 5:46 am
$
0
0

I've been using this Grrrrreat NAS Array and had been working for YEARS. Just last week it is now 100% Full and my share is gone.

 

It has FW fs-bc 1.3-b524,   4 x 500GB HD's   and a 1.3TB shares (but i cant access any of the shares \\share any more), but I can PING the NAS

 

Here is a lot info so you can get idea on the status on the array;

 

 

I can login into browser (using Firfox ver 29) the 3 x Green lights are on, the 4 HD's show (and are powered on and green {even during a bootup they do light up in order top/bottom}) also show Hot plug Indicator (in yellow) they are all  ST3500641AS (465GB each), I can't expand the share (it shows i have only available disk space is -2 MB free), It will not let me enable FTP (the on/off button shows, but will not complete when i enable it), i can't enable SSH (the on button shows, but will not complete when i press it), The SHARED folders show NOT READY backup clients NOT Ready. Under the SYSTEM Status screen  CPU is 100% Idle (all day long, even after a reboot(s)), network IPs are still good, FANs are 1704 RPM, disk temps are 54,35,38 Deg C, i can't even make a XRAY and save the file. I've tried using many ver of IE, Google chrome.


So, now I'm asking this community if you can help me. I've ran out of ideas on what to do. I also have the org Recovery CD's (but the PC i'm using does not support the NIC). Is there ANY WAY I can access the DATA off these HD's from ANY other way? like BOOT a CD using USB, Or access the data and maybe del a folder or 2 to free up some space, so that it will boot up.  or some other Advance HTTP CGI script (fsck check, del temp files..etc), that will enable me to see the boot up, or enable TFTP (i even tried to connect using that) or any other copy job.


i have been reading the posts and i did find out someway  you can make a serial ribbon cable and show the boot up (by taking case off), but i have not tried that part yet.


Any help you can give?


Thank you for your time.

↧
↧

Ask An Expert - The Server Room

March 20, 2008, 8:36 am
$
0
0

 

Welcome to intel.com/ITopia. Join the discussion, debate and collaborate. This is your opportunity to *ask our experts* what you want to know about Intel’s latest technologies. The floor is yours.
+This discussion is not intended to answer PC support question. If you have a support question go to {document:id=1086}.+

 

↧

S1200BTS: RAID Option ROM does not show on boot

March 27, 2013, 2:35 am
$
0
0

Hi all,

 

i bought a machine with an Intel Server Board S1200BTS and I want to configure a disk array using the chipset's features. I selected "RAID" as SATA mode and "RST" as RAID mode in the mass storage controller section of the BIOS setup. But how do i create the RAID array? No option ROM is displayed on boot, i tried hitting Ctrl+E or Ctrl+I anyway but nothing happens. Additionally, no SATA device is available for boot (i suppose because they are now handled by the RAID BIOS that i cannot access). Changing the RAID option to ESRT does not change this behaviour (just tried this for debugging purposes). I also checked the BIOS boot configuration because i think that a seperate boot option should be visible there but it only shows the two NICs and the EFI shell option. I updated the BIOS to the latest version 41 but that did not resolve the problem. Does anyone have a clue what i might be doing wrong here? Quiet boot is disabled by the way. Clearing the CMOS did not help either. If i change the controller mode back to AHCI my disks show up and i can boot from a single disk but this is not what i intend to do.

 

Any help is appreciated because the system was ordered without on-site support and therefore i would have to return it to the dealer (he insists that this feature should be available out of the box).

 

Alex

↧

Intel Active System Console - User/Password invalid

July 26, 2010, 5:00 am
$
0
0

Hi,

 

I installed Intel Active System Console 4.0 ond Windows Server 2008 R2 and setup the Password for the user admin. But now its allways wrong. First I thought my mistakte and I deinstalled the software and reinstalled it but still the password ist wrong. So how can I reset the password?

 

Thanks for your help.

J L

↧
↧

"Invalid session token. Authentication failure" when Remote KVM & CD on Intel Modular Server?

January 29, 2011, 2:51 am
$
0
0

I encounter error (alert window  "Invalid session token. Authentication failure") when doing Remote KVM  & CD on Intel Modular Server MFSYS35 (see attachment).

I have  restarted the CMM by click SAVE button on the IP Configuration menu  (without change anything) and the CMM restarted but the problem still.

The alert window disappear after restart all the chassis.

 

Is there any other way to get rid of alert window "Invalid session token. Authentication failure" without restart the chassis?

 

Firmware : 6.6.100.20101015.23953

 

best regards

Thony

↧

SR2612UR server reboots with CATERR

May 12, 2014, 8:00 am
$
0
0

Hello,

 

I have a SR2612UR server with S5520UR board and RS2bl040 raid controller. I have recentrly installed some Samsung SSD's and the performance was improved but after a few days the server rebooted unexpectedly. In Intel Active System Console i found the following logs:

 

2014-05-12 15:19:08BIOS Evt Sensor reports Timestamp Clock Sync. Event is first of two expected events from BIOS on every power on.InformationalOpen10.1.1.234177
2014-05-12 15:20:02OS Boot sensor 0 reports the boot from drive C has been completed.InformationalOpen10.1.1.234178
2014-05-12 15:20:02Operating system bootup.InformationalOpen10.1.1.234179
2014-05-12 15:19:46BIOS Evt Sensor reports a system boot event has occurred.InformationalOpen10.1.1.234180
2014-05-12 15:18:45CATERR reports it has been asserted.CRITICALClosed10.1.1.234181
2014-05-12 15:18:50Pwr Unit Status reports the power unit is powered off or being powered down.InformationalClosed10.1.1.234182
2014-05-12 15:18:42BIOS Evt Sensor reports Timestamp Clock Sync. Event is second of two expected events from BIOS on every power on.InformationalClosed10.1.1.234183
2014-05-12 15:18:55Pwr Unit Status reports the power unit is powered on.InformationalClosed10.1.1.234184
2014-05-12 15:18:56CATERR reports it has been deasserted.InformationalClosed10.1.1.234185

 

I found on some other forums that C6 State setting from BIOS could cause some troubles and disabling could solve those random reboots. Coult that be the sollution? Is there any side effects for disabling C6 CPU State?

↧

RAID 5 over 2TB, can not install windows server 2008 R2

September 10, 2013, 1:41 pm
$
0
0

The pc is freezing at Copying Windows files (0%)...

 

I followed this document by intel.

 

GUID Partition Table (GPT) How to install an Operating System (OS) using the

 

GUID Disk Partition Table (GPT) on an Intel® Hardware RAID (HWR) Array under

 

uEFI environment.

 

CPU         Xeon E5606 x2

memory         DDR3 32GB

MB        S5520HC

RAID card    RS2WC080

 

all firmware updated.

Build RAID 5, total space 2.7TB.

 

Need install windows server 2008 R2 x64 Std.

 

Could you help?

 

Thank

↧
Search

MFSYS25 And Promise Vtrack e310s

April 2, 2014, 9:59 am
$
0
0

Hello,

 

I have an Intel Multiflex system MFSYS25 with six blades and an Promise vTrak e310s.

4 of the servers have internal storage presented but i want that the other two servers to boot from Promise and use a shared lun. I followed the instructions in the connection guide from intel but when i'm trying to boot the second server, the first one freezes and cannot access the storage.

What is strange, is that even i don;t have any internal storage presented to the servers, in the LSI sas from the blade i see a lun 0 Multiflex V-LUN. How can i disable it?

I have to mention that i use RedHat Enterprise Linux 6.5 on the servers.

 

Please advice,

 

Thank you,

George Pochiscan

↧
↧

RMM3 Issues

September 30, 2010, 11:53 pm
$
0
0

Hi,

 

I am having a few issues with RMM3 modules that are installed in 2 servers.

 

To start with my network configuration is as follows:

 

Baseboard NIC(Lan Channel 1)
IP: 192.168.0.201
Subnet Mask: 255.255.255.0
Default Gateway: 0.0.0.0
Local Settings
IP: 192.168.0.25
Subnet Mask: 255.255.255.0
RMM NIC(Lan Channel 3)
IP: 192.168.1.201
Subnet Mask: 255.255.255.0
Default Gateway: 0.0.0.0
In this configuration I am able to access the RMM web page via the Baseboard NIC, but not the RMM NIC, I am also unable to ping the machine on 192.168.1.201. What would be causing this and how do I fix it so I can use both NIC's?
Another issue I am having is with the Remote Console.
The issue is that the server gets into a state that whenever I try and launch the Remote Console, Jviewer pops up a messages box saying "Error reading video data". Once it is in this state the only way that I am able to fix this issue is physically removing power from the server.
There are 2 methods I have identified so far that cause this issue:
1. The remote machine goes into sleep while a Remote Console session is open.
2. The server is shut down(but still has power) while a Remote Console session is still open.
I really either need a fix for this issue or at minimum a way to get the Remote Console working again once I end up in this state as I do not always have physical access to the machine.
Regards,
Zac
↧

Fan Speed Issue

May 23, 2014, 12:42 am
$
0
0

I bought a new Intel R2208GZ4GC with 2 E5 2680V2 CPU.

 

As a result of a high workload, the CPUs are getting very hot with about 75°C, but the fans are still very low with about 2.418 rpm.

 

My actual bios configuration:

 

Set Fan Profile: performance

Fan PWM Offset: 100

Altitude: 300-900m

Set Throttling Mode: auto

 

OS: Ubuntu 14.04 LTS

 

What should I have to do to tell the fans to increase the speed?

 

Thanks,

 

Bikearni

↧

Intel adapter teaming issue

June 10, 2008, 2:08 pm
$
0
0

So I went to configure adapter teaming and had nothing but problems.  The wizard would start the process, create the Intel Advanced Network Services Virtual Adapter, then hang and not complete any other parts of the process.  I found out that I was using the wrong version of the software for my adapters (which are Pro/1000 MT Dual Port), installed an older version, and all was good to go... except for the 4 Virtual adapters that were created previously by failed attempts of the wizard.  How do I remove these unused virtual adapters from the server?  Simply trying to uninstall them via the device manager doesn't work.  Neither did removing the teaming software, rebooting the server, or simply trying to delete the network connection.

↧

QPI link rate test failed by Intel Processor Diagnostic Tool with Haswell-EP 2.40Ghz ES L0 stepping CPU

May 27, 2014, 8:40 pm
$
0
0

Hello,

 

I had tried to diagnose Intel Grentley platform with two Haswell-EP 2.40Ghz ES L0 stepping 12 core 135W CPU installed by Intel Processor Diagnostic Tool v2.10.0.0.MP under Windows Server 2008 R2 SP1 x64 OS but got QPI link rate test failed message here, also the FSB could not be detected, I've no idea if IPDT support Haswell-EP CPU or not, but the BIOS could detect QPI link rate as 9.6T/s correctly, please advise.

 

Below is the test result of IPDT:

 

---------------------------
--- Testing Processor 1 ---
---------------------------


--- IPDT64 - rev  2.10.0.0.MP ---


--- Start Time: 05/27/2014 00:29:14---


--- Skipping Config ---


--- Reading CPU Manufacturer ---

Expected --> GenuineIntel
Detected --> GenuineIntel
Found --- Genuine Intel Processor ---

--- Temperature Test ---

Temperature Test Passed!!!


Temperature = 59 degrees C below maximum.


--- Reading Brand String ---

Detected Brand String:
Genuine Intel   2.40GHz

Brand String Test Passed!!!


--- Reading CPU Frequency ---

Expected CPU Frequency is --> 2.40


Detected CPU Frequency is --> 2.40026

CPU Frequency Test Passed!!!


--- FSB NOT Supported on this Processor ---


--- Running Base Clock test ---


Detected Base Clock --> 100
Base Clock test Pass ---
--- Error while retrieving QPI Link rate  ---
..QPI Link rate Test Failed..

QPI Link rate Test Failed. Error while retrieving QPI Link rate

--- Error while retrieving QPI Link rate  ---
..QPI Link rate Test Failed..

QPI Link rate Test Failed. Error while retrieving QPI Link rate


--- Test End Time: 05/27/2014 00:29:16---


---------------------------
--- Testing Processor 2 ---
---------------------------


--- IPDT64 - rev  2.10.0.0.MP ---


--- Start Time: 05/27/2014 00:29:16---


--- Skipping Config ---


--- Reading CPU Manufacturer ---

Expected --> GenuineIntel
Detected --> GenuineIntel
Found --- Genuine Intel Processor ---

--- Temperature Test ---

Temperature Test Passed!!!


Temperature = 62 degrees C below maximum.


--- Reading Brand String ---

Detected Brand String:
Genuine Intel   2.40GHz

Brand String Test Passed!!!


--- Reading CPU Frequency ---

Expected CPU Frequency is --> 2.40


Detected CPU Frequency is --> 2.82848

CPU Frequency Test Passed with Warning!!!

The processor frequency could be affected by power management features. In order
to ensure the processor frequency is not affected by a power management setting,
enter BIOS, load defaults, and disable any 'Over-Clocking' or power
management features that may affect processor frequency. Also, set any
software applications which control power management features to default.


--- FSB NOT Supported on this Processor ---


--- Running Base Clock test ---


Detected Base Clock --> 101
Base Clock test Pass ---
--- Error while retrieving QPI Link rate  ---
..QPI Link rate Test Failed..

QPI Link rate Test Failed. Error while retrieving QPI Link rate

--- Error while retrieving QPI Link rate  ---
..QPI Link rate Test Failed..

QPI Link rate Test Failed. Error while retrieving QPI Link rate


--- Test End Time: 05/27/2014 00:29:17---


-----------------------------------
--- Multi Processor Stress Test ---
-----------------------------------


--- IPDT64 - rev  2.10.0.0.MP ---


--- Start Time: 05/27/2014 00:29:17---


--- Skipping Config ---


--- Multi Proc Load ---


--- Multi Processor Load Level set to - 64 - for - 4 - minutes ---


..Multi Proc Stress Load Passed..


--- Test End Time: 05/27/2014 00:33:19---

 


    ---------------
    --- Summary ---
    ---------------

Processor Status
    1  Fail
    2  Fail

System Information
------------------
Processor Name: Genuine Intel(R) CPU @ 2.40GHz
Processor Information: Intel64 Family 6 Model 63 Stepping 1
Number of Physical Cores: 24
Number of Logical Cores: 24
Installed System Memory: 192 GB
Operating System: Microsoft Windows Server 2008 R2 Enterprise 64-bit
Graphics Information: Matrox G200e (ServerEngines)
System Product: ŸŸŸŸŸŸŸŸŸŸŸŸŸŸŸŸ
System BIOS: 00.80

 

And below is the CPU information captured from CPU-Z v1.69.0.x64:

 

Processor 1ID = 0
     Number of cores12 (max 16)
     Number of threads12 (max 32)
     NameIntel Core i3/i5/i7 4xxx
     CodenameHaswell
     SpecificationGenuine Intel(R) CPU @ 2.40GHz (Engineering Sample)
     Package (platform ID)(0x0)
     CPUID6.F.1
     Extended CPUID6.3F
     Core Stepping
     TDP Limit135 Watts
     Tjmax103.0 蚓
     Core Speed1199.7 MHz
     Multiplier x Bus Speed12.0 x 100.0 MHz
     Stock frequency2400 MHz
     Instructions setsMMX, SSE, SSE2, SSE3, SSSE3, SSE4.1, SSE4.2, EM64T, VT-x, AES, AVX, AVX2, FMA3
     L1 Data cache12 x 32 KBytes, 8-way set associative, 64-byte line size
     L1 Instruction cache12 x 32 KBytes, 8-way set associative, 64-byte line size
     L2 cache12 x 256 KBytes, 8-way set associative, 64-byte line size
     L3 cache30 MBytes, 20-way set associative, 64-byte line size
     FID/VID Controlyes
     Turbo Modesupported, enabled
     Max non-turbo ratio24x
     Max turbo ratio27x
     Max efficiency ratio12x
     Max Power270 Watts
     Min Power58 Watts
     O/C binsnone
     Ratio 1 core30x
     Ratio 2 cores29x
     Ratio 3 cores28x
     Ratio 4 cores27x
     Ratio 5 cores27x
     Ratio 6 cores27x
     Ratio 7 cores27x
     Ratio 8 cores27x
     Ratio 9 cores27x
     Ratio 10 cores27x
     Ratio 11 cores27x
     Ratio 12 cores27x
     Ratio 13 cores27x
     Ratio 14 cores27x
     Ratio 15 cores27x
     Ratio 16 cores27x
     Ratio 17 cores27x
     Ratio 18 cores27x
     TSC2400.0 MHz
     APERF1200.0 MHz
     MPERF2400.0 MHz
     IA Voltage ModePCU adaptive
     IA Voltage Offset0 mV
     GT Voltage ModePCU adaptive
     GT Voltage Offset0 mV
     LLC/Ring Voltage ModePCU adaptive
     LLC/Ring Voltage Offset0 mV
     Agent Voltage ModePCU adaptive
     Agent Voltage Offset0 mV
Processor 2ID = 1
     Number of cores12 (max 16)
     Number of threads12 (max 32)
     NameIntel Core i3/i5/i7 4xxx
     CodenameHaswell
     SpecificationGenuine Intel(R) CPU @ 2.40GHz (Engineering Sample)
     Package (platform ID)(0x0)
     CPUID6.F.1
     Extended CPUID6.3F
     Core Stepping
     TDP Limit135 Watts
     Tjmax103.0 蚓
     Core Speed1199.7 MHz
     Multiplier x Bus Speed12.0 x 100.0 MHz
     Stock frequency2400 MHz
     Instructions setsMMX, SSE, SSE2, SSE3, SSSE3, SSE4.1, SSE4.2, EM64T, VT-x, AES, AVX, AVX2, FMA3
     L1 Data cache12 x 32 KBytes, 8-way set associative, 64-byte line size
     L1 Instruction cache12 x 32 KBytes, 8-way set associative, 64-byte line size
     L2 cache12 x 256 KBytes, 8-way set associative, 64-byte line size
     L3 cache30 MBytes, 20-way set associative, 64-byte line size
     FID/VID Controlyes
     Turbo Modesupported, enabled
     Max non-turbo ratio24x
     Max turbo ratio27x
     Max efficiency ratio12x
     Max Power270 Watts
     Min Power58 Watts
     O/C binsnone
     Ratio 1 core30x
     Ratio 2 cores29x
     Ratio 3 cores28x
     Ratio 4 cores27x
     Ratio 5 cores27x
     Ratio 6 cores27x
     Ratio 7 cores27x
     Ratio 8 cores27x
     Ratio 9 cores27x
     Ratio 10 cores27x
     Ratio 11 cores27x
     Ratio 12 cores27x
     Ratio 13 cores27x
     Ratio 14 cores27x
     Ratio 15 cores27x
     Ratio 16 cores27x
     Ratio 17 cores27x
     Ratio 18 cores27x
     TSC2399.9 MHz
     APERF1199.9 MHz
     MPERF2399.9 MHz
     IA Voltage ModePCU adaptive
     IA Voltage Offset0 mV
     GT Voltage ModePCU adaptive
     GT Voltage Offset0 mV
     LLC/Ring Voltage ModePCU adaptive
     LLC/Ring Voltage Offset0 mV
     Agent Voltage ModePCU adaptive
     Agent Voltage Offset0 mV

 

Thanks,

Jacky

 

訊息由此人編輯：Jacky Lee

↧
↧

S2600CP CPU Fan Control

July 29, 2012, 9:41 pm
$
0
0

I just built a new server with a S2600CP motherboard, Xeon E5 CPU and BXSTS100C Cooler. It's all up and running quite well, but the CPU fan is LOUD!. It's obviously running at full speed, as you can hear it step up during the boot process. The cooling fins are almost cold due to the high air flow,  is there some way to lower the fans speed and ths reduce the noise coming from this thing?

 

Thanks in advance.

↧

Ask An Expert - The Server Room

March 20, 2008, 8:36 am
$
0
0

 

Welcome to intel.com/ITopia. Join the discussion, debate and collaborate. This is your opportunity to *ask our experts* what you want to know about Intel’s latest technologies. The floor is yours.
+This discussion is not intended to answer PC support question. If you have a support question go to {document:id=1086}.+

 

↧
Search

S1200BTS: RAID Option ROM does not show on boot

March 27, 2013, 2:35 am
$
0
0

Hi all,

 

i bought a machine with an Intel Server Board S1200BTS and I want to configure a disk array using the chipset's features. I selected "RAID" as SATA mode and "RST" as RAID mode in the mass storage controller section of the BIOS setup. But how do i create the RAID array? No option ROM is displayed on boot, i tried hitting Ctrl+E or Ctrl+I anyway but nothing happens. Additionally, no SATA device is available for boot (i suppose because they are now handled by the RAID BIOS that i cannot access). Changing the RAID option to ESRT does not change this behaviour (just tried this for debugging purposes). I also checked the BIOS boot configuration because i think that a seperate boot option should be visible there but it only shows the two NICs and the EFI shell option. I updated the BIOS to the latest version 41 but that did not resolve the problem. Does anyone have a clue what i might be doing wrong here? Quiet boot is disabled by the way. Clearing the CMOS did not help either. If i change the controller mode back to AHCI my disks show up and i can boot from a single disk but this is not what i intend to do.

 

Any help is appreciated because the system was ordered without on-site support and therefore i would have to return it to the dealer (he insists that this feature should be available out of the box).

 

Alex

↧

Intel Server Board S2600GZ (Server System R1208GL4DS) & Memory

June 2, 2014, 1:48 pm
$
0
0

Hello!

 

I've just buy Server Intel R1208GL4DS with two Xeon E5-2620v2 and installed 8 x Crucial 8192Mb DDR3 1600MHz ECC Reg modules (CT8G3ERSLD4160B).

It wont start in spite of all green leds tell me that all is OK.

I've read instruction and found that S2600GZ Server Board is not support 1600MHz low voltage (1.35v) modules.

After it I've tried to install ordinary DDR3 DIMMs (no ECC, no Reg). Result is the same.

 

The question is: server wont start because these types of DIMMs are not supported? Or possible it is something wrong Server Board or CPU?

I'm asking because it will take a very lot of time for me to change DIMMs or/and Board to another.

 

Signs are:

- three green leds are lighting (System Status LED, 12 Volt Stand-By Present LED, System Power Good LED),

- no any leds are lighting, 

- "No signal" monitor screen,

- fans are rotating,

- keyboard "Num lock" not changing.

 

Any help are highly appreciated!

 

With best wishes,

Maxim

↧
↧

Controller ID: 0 PD Predictive failure Question

January 15, 2013, 6:58 am
$
0
0

My question is how the heck do I determine which drive is about to fail, without having to pull the system offline and run SMART checks on each drive.

Here's the event:

"

Controller ID:  0   PD Predictive failure: 

    Int.Ports 4-7:2:0

Event ID:96

"

 

OS is Server 2008 R2

 

 

Thanks in advance for the assistance.

↧

S5520UR BMC lost

June 3, 2014, 4:43 am
$
0
0

Hi Experts,

 

I have an S5520UR motherboard in a SR2612UR server.

It worked for years but before a new OS install I decided to update it to the latest (already 3 years old) firmware.

I installed the BIOS60/BMC58/FUR26/ME112 via the the EFI shell.

During the update I already noticed that the FRU and ME updates are failed saying "BMC are already in firmware transfer mode".

After reboot I noticed that I BMC LAN menu is greyed out in BIOS.

 

I removed the power cord redo the update with same result, Boot block are showing version 0.00

I tried the force update jumper according to: https://communities.intel.com/message/86309#86309

reset to default bios settings, force update on and back again but it does not fixed the BMC.

 

Luckily the machine boots, works ok, but I`m afraid without a working BMC it will not run well and maybe damaged.

Do you have any advice what should I try to resurrect the BMC ?

What is you opinion about running the server without working BMC ?

 

I wish you have a better luck.

↧

RAID Driver for Intel S3000AH motherboard Windows Server 2008 R2

October 29, 2010, 4:52 am
$
0
0

Support for this motherboard has ended.  This board had been purchased 02/01/2007.  However, with the release of Windows Server 2008 R2, it's like breathing new life into a server that still has adequate speed.  Currently I have an Intel Core 2 Duo Processor in the system with still room to grow.

 

Sadly, there is no W2K8 R2 driver for the Intel Embedded RAID, Intel® ICH7R I/O Controller.

 

Hey INTEL!!!  Can you make a driver please???  I purchased your board with the consideration that I could later upgrade it keeping up with technology.  Thanks in advance.

 

As for other readers, if you know of a 3rd party driver source, please point me in the right direction.

 

Superman808

↧
Viewing all 3319 articles
Browse latest View live
Search
<script src="https://jsc.adskeeper.com/r/s/rssing.com.1596347.js" async> </script>