Quantcast
Channel: Intel Communities : Popular Discussions - Servers
Viewing all 3319 articles
Browse latest View live
↧

E3-1275v3 P4600 Graphics

December 25, 2013, 12:44 pm
$
0
0

I have this cpu installed with Server 2012 R2. I wanted to install the drivers for the p4600 graphics to just do a really basic RemoteFX run. I know it is far from optimal but still wanted to just try it out. I found a driver for the p4600 graphics here Download Intel HD Graphics P4600/P4700 Driver 9.18.10.3222 64-bit for Windows XP 64 bit, Windows Vista 64 bit, Windows 7 64 bit, Windows 8 64 bit.

 

However when I went to go add the driver through device manager it only results in a Yellow bang and the device is not usable. The driver installs no problem just the graphics adapter is not fully functioning. Is there a way I can install this driver and get use out of the p4600 graphics on server 2012 r2 or am I SOL?

 

I appreciate any help thank you.

↧
Search

I have mfsys25 intel modular server with modular server control after update java on 8 version i cant run remote kvm help please

May 13, 2015, 9:02 am
$
0
0

in java7 i placed ip of msc in exeption security list in java options but in java8 it does not help

i can't run kvm

help

↧
↧

S3420GP and RAM

May 9, 2011, 1:17 am
$
0
0

Hello,

I have a server mothebord S3420GP with 6 memory slots.

Now, I have 2 slots filled with these: 2x KINGSTON 4GB 1333MHz DDR3 ECC CL9 DIMM with Thermal Sensor.

 

Is possible to use another 4 these RAMs? So I would have 24 GB RAM with 6 x 4 GB. Is this combination possible?

 

Or is possible to use 4 x KINGSTON 8GB DDR3 1333MHz CL9 ECC Dual Rank BOX.

So total memory size will be 32 GB RAM.

 

Thanks for any answers.

 

↧

first start problem

October 28, 2013, 7:25 am
$
0
0

I had created a operating software from bootable usb device but I am getting this error: "Initializing and Establishing Link"  . I am using a SR1550AL server and I thing I should disable network from bios but couldnt find disable option any help about it?

↧

E3-1275v3 P4600 Graphics

December 25, 2013, 12:44 pm
$
0
0

I have this cpu installed with Server 2012 R2. I wanted to install the drivers for the p4600 graphics to just do a really basic RemoteFX run. I know it is far from optimal but still wanted to just try it out. I found a driver for the p4600 graphics here Download Intel HD Graphics P4600/P4700 Driver 9.18.10.3222 64-bit for Windows XP 64 bit, Windows Vista 64 bit, Windows 7 64 bit, Windows 8 64 bit.

 

However when I went to go add the driver through device manager it only results in a Yellow bang and the device is not usable. The driver installs no problem just the graphics adapter is not fully functioning. Is there a way I can install this driver and get use out of the p4600 graphics on server 2012 r2 or am I SOL?

 

I appreciate any help thank you.

↧
↧

Install Windows 2008 R2 on GPT disk

May 30, 2013, 1:04 am
$
0
0

Hi

What i have:

1. Server R1000GZ (with rms25pb040 raid module)

2. Windows server 2008 R2 installation disk

3. 4HDD in raid array (RAID5 5.4Tb size summary, one virtual drive)

 

I want to install Windows 2008 R2 on this VD (2 partitions: 60Gb for windows (system) and second partition 5.3Tb for data)

Now i start setup of Windows, add drivers for rms25pb040 (windows see this VD), use diskpart to convert disk to GPT style, create several partitions (EFI, MSR, MSDATA) but setup cannot continue: "windows cannot be installed on this disk. The selected disk is of the GPT partition style"

 

What have i already tried:

1. Boot from flash - the same result;

2. Split GPT disk directly from windows installation manager - it just convert disk (vd) to MBR style and i see 2 "logical" drive 1.9Tb each.

3. Boot in EFI shell and try to launch "fs0:> \EFI\BOOT\BOOTX64.EFI" but i get thie error: " '\EFI\BOOT\BOOTX64.EFI' is not recognized as an internal or external command, operable program, or batch file"

 

Mb i do smth wrong? Any ideas how can i install Windows 2008 R2 in GPT disk?

 

Thx for your answers!

↧

why i can not get same "netsh int tcp show global" settings with win 8 as 7?

February 12, 2013, 9:50 am
$
0
0

i have a tyan s7025 with two xeon 5520 . i installed win 7 x64 ultimate and win 8 pro x64 .

with win 7 if i use the command : netsh int tcp show global then the result is  :

 

Microsoft Windows [Version 6.1.7601]

Copyright (c) 2009 Microsoft Corporation.  All rights reserved.

 

C:\Windows\system32>netsh int tcp show global

Querying active state...

 

TCP Global Parameters

----------------------------------------------

Receive-Side Scaling State          : enabled

Chimney Offload State               : enabled

NetDMA State                        : enabled

Direct Cache Acess (DCA)            : enabled

Receive Window Auto-Tuning Level    : normal

Add-On Congestion Control Provider  : ctcp

ECN Capability                      : disabled

RFC 1323 Timestamps                 : disabled

 

while with with 8 on the same mainboard with drivers being latest too , i get :

Microsoft Windows [Version 6.2.9200]

(c) 2012 Microsoft Corporation. All rights reserved.

 

C:\Windows\system32>netsh int tcp show global

Querying active state...

 

TCP Global Parameters

----------------------------------------------

Receive-Side Scaling State          : enabled

Chimney Offload State               : disabled

NetDMA State                        : disabled

Direct Cache Access (DCA)           : disabled

Receive Window Auto-Tuning Level    : normal

Add-On Congestion Control Provider  : none

ECN Capability                      : disabled

RFC 1323 Timestamps                 : disabled

Initial RTO                         : 3000

Receive Segment Coalescing State    : disabled

 

despite i added in registry some new keys :

HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Tcpip\Parameters

EnableDCA=1 and EnableTCPA=1

they have no effect even many reboot ... while my settings in win 7 were done without anything in the registry except using tcpoptimizer from speed guide

 

what should i do ?

i also be glad if someone gives a link to a wiki about the registry keys for tcip and the different windows releases, even something [improbable] knowing all the keys of all the windows...

↧

Intel Active System Console - User/Password invalid

July 26, 2010, 5:00 am
$
0
0

Hi,

 

I installed Intel Active System Console 4.0 ond Windows Server 2008 R2 and setup the Password for the user admin. But now its allways wrong. First I thought my mistakte and I deinstalled the software and reinstalled it but still the password ist wrong. So how can I reset the password?

 

Thanks for your help.

J L

↧
Search

Intel S1200BTS & Kingston KVR-memory issue

August 20, 2011, 2:14 pm
$
0
0

Hello.

 

I did check the compability list before I orderd myself a S1200BTS server board and a pair of Kingston 8GB ECC-modules and I can admit that I did not see the exact RAM model number in the list but I somehow in my own little mind thought that these modules would match.

No luck.

 

Kingston KVR1333D3LQ8R9S/8G is not compatible with the current S1200BTS and the firmware it was shipped with.

Just wanted to ask if anyone else here has experienced the same problem and what did You do to handle it?

I do however find it a bit strange that the board support up to 32GB ECC (4 slots) but in the comp. list it only shows 4GB modules as compatible giving it a total of 16GB installed.

Oh well, no harm done and I feel pretty confident that this board will come to support these memorys in a future firmware update (crossing fingers and toes).

 

Have a nice evening.

 

Cheers.

 

Edit 2011-08-24:

Bpedersen: Thank you for your reply.

 

I bought a pair of cheap 2GB DDR3 (making it 4GB) modules for $40 just to get the machine up n' running. No Beep errors (yay!) but since I did not get any screen signal I got back to digging for a solution to this "new" and exciting problem.

After clicking my way through intel.com I all of a sudden saw this little "Note" saying: "The iGFX feature in the graphic processor is not supported in S1200BT family  products."

http://www.intel.com/support/motherboards/server/sb/CS-032414.htm

Say what?

 

I sat around just staring at the text and I did not remember reading anything about not being supported in S1200BT-series before I bought this board (2 months ago).

I guess my lack of 20-20 vision gave me some trouble here. Or am I interpreting that text wrong and infact the VGA-port is working and I am just a complete *** and somehow managed to transform that VGA-cable to a camel which you surely know does not send a working VGA-signal.

Well, way to late now. Will keep investigating in this matter tomorrow.

Feels like I should have gotten myself a Supermicro board. But hey, they probably have their own little quirks, like support for 8GB modules and a working VGA-port...

Just hoping that I am the problem here and not the hardware.

 

Good night.

↧
↧

first start problem

October 28, 2013, 7:25 am
$
0
0

I had created a operating software from bootable usb device but I am getting this error: "Initializing and Establishing Link"  . I am using a SR1550AL server and I thing I should disable network from bios but couldnt find disable option any help about it?

↧

Install ATI FirePro V7900 in a Intel SR2625 URLX Server

May 22, 2015, 6:09 am
$
0
0

Hi, would the above be possible? If so what would i need except for the card it self?

 

Best regards

 

Gudmund

↧

S5520HC fanless

May 22, 2015, 10:56 am
$
0
0

Hello all,

I would buy a fanless power supply for my server , you know what I buy ? thanks

 

 

S5520HC@2 Xeon e5620

Chassis SC5650

↧

Fanless power supply

May 3, 2015, 5:21 am
$
0
0

Goodmorning everyone.

I have a card S5520GC which is housed inside a case SC5650DP .

I use the server as a workstation . My problem is that the fan supply is quite noisy , it was also new and now is getting worse .

I want to buy a new power supply , possibly fanless , can anyone suggest me what to buy ?

I do not have any extra power module , I have six hard drives and a video card , I just need a 600W power supply , I would just be sure you have all the cables needed to feed two processors , the board , the fans and hard drives .

I await your advice thanks

↧
↧

Intel adapter teaming issue

June 10, 2008, 2:08 pm
$
0
0

So I went to configure adapter teaming and had nothing but problems.  The wizard would start the process, create the Intel Advanced Network Services Virtual Adapter, then hang and not complete any other parts of the process.  I found out that I was using the wrong version of the software for my adapters (which are Pro/1000 MT Dual Port), installed an older version, and all was good to go... except for the 4 Virtual adapters that were created previously by failed attempts of the wizard.  How do I remove these unused virtual adapters from the server?  Simply trying to uninstall them via the device manager doesn't work.  Neither did removing the teaming software, rebooting the server, or simply trying to delete the network connection.

↧

Intel S1200BTS & Kingston KVR-memory issue

August 20, 2011, 2:14 pm
$
0
0

Hello.

 

I did check the compability list before I orderd myself a S1200BTS server board and a pair of Kingston 8GB ECC-modules and I can admit that I did not see the exact RAM model number in the list but I somehow in my own little mind thought that these modules would match.

No luck.

 

Kingston KVR1333D3LQ8R9S/8G is not compatible with the current S1200BTS and the firmware it was shipped with.

Just wanted to ask if anyone else here has experienced the same problem and what did You do to handle it?

I do however find it a bit strange that the board support up to 32GB ECC (4 slots) but in the comp. list it only shows 4GB modules as compatible giving it a total of 16GB installed.

Oh well, no harm done and I feel pretty confident that this board will come to support these memorys in a future firmware update (crossing fingers and toes).

 

Have a nice evening.

 

Cheers.

 

Edit 2011-08-24:

Bpedersen: Thank you for your reply.

 

I bought a pair of cheap 2GB DDR3 (making it 4GB) modules for $40 just to get the machine up n' running. No Beep errors (yay!) but since I did not get any screen signal I got back to digging for a solution to this "new" and exciting problem.

After clicking my way through intel.com I all of a sudden saw this little "Note" saying: "The iGFX feature in the graphic processor is not supported in S1200BT family  products."

http://www.intel.com/support/motherboards/server/sb/CS-032414.htm

Say what?

 

I sat around just staring at the text and I did not remember reading anything about not being supported in S1200BT-series before I bought this board (2 months ago).

I guess my lack of 20-20 vision gave me some trouble here. Or am I interpreting that text wrong and infact the VGA-port is working and I am just a complete *** and somehow managed to transform that VGA-cable to a camel which you surely know does not send a working VGA-signal.

Well, way to late now. Will keep investigating in this matter tomorrow.

Feels like I should have gotten myself a Supermicro board. But hey, they probably have their own little quirks, like support for 8GB modules and a working VGA-port...

Just hoping that I am the problem here and not the hardware.

 

Good night.

↧
Search

JBOD2312S2SP Power Supply Issue?

June 29, 2013, 1:51 am
$
0
0

I have a JBOD2312S2SP Intel Raid Enclosure (Intel® Storage Systems JBOD Family) at my house and woke up to screaming fan noises.  Warning light was blinking and the console showed this:

 

ID = 206

SEQUENCE NUMBER = 164362

TIME = 29-06-2013 03:13:39

LOCALIZED MESSAGE = Controller ID:  0   Power supply cable removed on enclosure:   1      Power Supply   1

 

Note I only have one power supply so if the cable was removed not sure how it was still running.  Right after that warning received the below messages copied from the logs so the top one is the latest:


ID = 243
SEQUENCE NUMBER = 164371
TIME = 29-06-2013 03:13:44
LOCALIZED MESSAGE = Controller ID:  0   Fan speed changed on enclosure:   1  Fan       3

ID = 243
SEQUENCE NUMBER = 164370
TIME = 29-06-2013 03:13:44
LOCALIZED MESSAGE = Controller ID:  0   Fan speed changed on enclosure:   1  Fan       2

ID = 243
SEQUENCE NUMBER = 164369
TIME = 29-06-2013 03:13:44
LOCALIZED MESSAGE = Controller ID:  0   Fan speed changed on enclosure:   1  Fan       1

ID = 243
SEQUENCE NUMBER = 164368
TIME = 29-06-2013 03:13:42
LOCALIZED MESSAGE = Controller ID:  0   Fan speed changed on enclosure:   1  Fan       3

ID = 243
SEQUENCE NUMBER = 164367
TIME = 29-06-2013 03:13:42
LOCALIZED MESSAGE = Controller ID:  0   Fan speed changed on enclosure:   1  Fan       2

ID = 243
SEQUENCE NUMBER = 164366
TIME = 29-06-2013 03:13:42
LOCALIZED MESSAGE = Controller ID:  0   Fan speed changed on enclosure:   1  Fan       1

ID = 243
SEQUENCE NUMBER = 164365
TIME = 29-06-2013 03:13:40
LOCALIZED MESSAGE = Controller ID:  0   Fan speed changed on enclosure:   1  Fan       3

ID = 243
SEQUENCE NUMBER = 164364
TIME = 29-06-2013 03:13:40
LOCALIZED MESSAGE = Controller ID:  0   Fan speed changed on enclosure:   1  Fan       2

ID = 243
SEQUENCE NUMBER = 164363
TIME = 29-06-2013 03:13:40
LOCALIZED MESSAGE = Controller ID:  0   Fan speed changed on enclosure:   1  Fan       1

 

Last message until 6 minutes later I powered up a computer to remove in and shutdown the system.  Pulled the power plug, put it back in, powered everything up, and it's running right now without issue.  Thoughts?

 

Edit:  As a side note, the Intel Raid Web Console shows this drive cage with 2 power supplies.  Always did.  I only have one.  So not sure if that's just how many it can hold or if it's just not intelligent enough to detect the number of drives.

 

Thanks.

 

Steve

↧

S1200BTL chassis fan running full speed

June 1, 2012, 10:42 am
$
0
0

Hello,

 

I have an S1200BTL motherboard and an P4303xxsfcnna chassis.  I've used Intel Deployment Assistant to update BIOS, BMC, FRU, etc.  The chassis fans are still running at full speed.  The BIOS only has an option to change to altitude, but the fan speed is set to auto and cannot be configured.

Any reason why the fans would be running full speed on both of my systems?

Thanks

↧
↧

S1200BTL LED CODES

July 1, 2012, 10:40 am
$
0
0

Hi,

I have a non booting s1200btl which stops in  boot process with no display and following LED Status

 

ID Blue LED = off         STATUS LED= Green then after about 1 minute flashing amber

LEDS:   MSB  01011001 LSB

 

0=off

1=on

On/Off front panel switch works

Could someone please tell me what this means.

Thanks

↧

Intel Active System Console - User/Password invalid

July 26, 2010, 5:00 am
$
0
0

Hi,

 

I installed Intel Active System Console 4.0 ond Windows Server 2008 R2 and setup the Password for the user admin. But now its allways wrong. First I thought my mistakte and I deinstalled the software and reinstalled it but still the password ist wrong. So how can I reset the password?

 

Thanks for your help.

J L

↧

"Invalid session token. Authentication failure" when Remote KVM & CD on Intel Modular Server?

January 29, 2011, 2:51 am
$
0
0

I encounter error (alert window  "Invalid session token. Authentication failure") when doing Remote KVM  & CD on Intel Modular Server MFSYS35 (see attachment).

I have  restarted the CMM by click SAVE button on the IP Configuration menu  (without change anything) and the CMM restarted but the problem still.

The alert window disappear after restart all the chassis.

 

Is there any other way to get rid of alert window "Invalid session token. Authentication failure" without restart the chassis?

 

Firmware : 6.6.100.20101015.23953

 

best regards

Thony

↧
Viewing all 3319 articles
Browse latest View live
Search
<script src="https://jsc.adskeeper.com/r/s/rssing.com.1596347.js" async> </script>